斷電器是升降貨梯http://55506132.com/中必不可少的元件，其作用是不容忽視的。斷電器可以很好的保護升降貨梯的電路系統，防止電路損壞給設備帶來不良影響，從而大大保證了適用人員的人身安全并能夠保證設備的正常運行。那么斷電器應該如何接入呢？

1、正確接入電源，交流電有380v和220v兩種，不要接錯。升降貨梯如果采用直接把斷電器焊接在升降貨梯的印制板上使用，要保證斷電器引出線能順利插下，防止貼得過緊使斷電器根部受到張力的作用。
Proper access to power, 380v and 220v AC have two kinds, do not take the wrong. If cargo lifter welded directly to the breaker used on cargo lifter PCB, to ensure a smooth breaker inserted under Lead prevent stick too tight so that the roots under tension breaker role.
2、焊接時要防止溫度過高，因焊接溫度過高可造成升降貨梯的斷電器線圈與引出端脫焊，并影響簧片觸點性能，還可能造成構件開裂。焊接完后要進行清洗，防止焊料的有害物質侵害到斷電器根部。
Welding To prevent overheating, due to high temperature soldering can cause cargo lifter breaker coil terminals Desoldering, and affect the performance of the reed contacts and may cause component cracking. After welding must be cleaned to prevent solder against harmful substances into the breaker roots.

3、對于硬引出端的升降貨梯http://55506132.com/斷電器，在安裝時不允許彎折，以防止玻璃絕緣子破裂造成漏氣。要求選擇插座以防過緊或過松，并保證插座清潔，防止接觸不良，對于軟引出端的斷電器，盡量避免往返彎折，并保證根部不受力。
For hard terminations Huoti breaker, the installation does not allow bending, glass insulators to prevent breakage caused by leakage. Asked to select the socket to prevent too tight or too loose, and to ensure that the socket clean and prevent bad contact terminals for soft breaker, avoid bending back and forth, and to ensure that the roots of no force.
4、升降貨梯斷電器應在干燥、陰涼處使用。
Cargo lifter breaker should be in a dry, cool place to use.