剪叉式升降平臺依靠液壓油缸支撐剪叉結構進行上升和下降的，兩組剪叉臂同時運行才能保證設備的平衡上升。通常設備超載會導致剪叉式結構變形或者折彎，也有的時候是因?yàn)槠渌鼥|西卡住而未能及時的清理出來導軌設備的叉臂的變形。很多客戶因?yàn)檫`規使用導致叉臂的變形或者折斷，那么應該如何維修呢？下面濟南天銳升降機械的有關專家給大家提供一些解決的方法。

1、一旦出現這種情況一定要及時的維修，或者設備在不平行的狀態下使用可能會造成更嚴重的問題。維修的方法有幾種，客戶可以根據自己的實際情況選擇適合的，比如移動高空的升降平臺，可以選擇拆除變形的叉臂重新組合再進行使用，可能高度上達不到原來的高度，但是其它的功能是相同的。
Once the repairs must be timely, or equipment used in the non-parallel state that happens may cause more serious problems. There are several methods of maintenance, customers can choose according to their actual situation, such as a mobile aerial lift platform, you can choose dismantle deformable wishbones regroup again be used, may not reach the height of the original height, but other the function is the same.

2、如果還想保持原來的升降高度，可以把變形的叉臂拆卸掉發回廠家，廠家會根據叉臂的大小重新發貨，要注意的是叉臂的更新要一組同時更換，不能只換單獨一個根，這樣才能保證設備的平行。
If you want to keep the height of the original, you can put off the demolition deformed wishbone back manufacturers, manufacturers will be based on the size of the wishbone again shipped to note is updated wishbone to a group of its replacement, not only for individual a root, so as to ensure parallel devices.

升降機廠家：http://55506132.com/